Diabolic Grade 5 Titanium Hollow Pivotal Seat Bolt BMX Dirt Jumping Macneil

Along with integrated head tubes the pivotal seat system has been one of the game changing innovations that set a whole new level in BMX within the last 10 years. Why not make your bike even better? Fits all pivotal seat/post systems. 
 
               *Machined from aerospace grade 5 titanium
               *hollow and 50% lighter then original solid heavy steel bolt
               *Weighs only 14 grams
               *Lifetime warranty to original owner
               *Will never rust
               *Free shipping within USA
    
 Removing your stock pivotal bolt.
 
             Step 1. Remove seat from post. 
             Step 2. Now with bolt exposed. Push pivotal bolt up through top of seat with 3/8 extension or large screw driver. Be careful not to force it out, you can rip the pivotal bolt flap if you push too hard.
    Use flat head screw drivers to pry foam and pivotal opening around bolt head as you work the bolt through top of seat. Similar to removing a tire. 
              Step 3. Now install titanium bolt just as you did in reverse. Using flat head screw driver to pry seat foam and flap around top of bolt head until the bolt can be exposed enough to thread onto pivotal post. 
             Step 4. Tightening the bolt will finish pulling the bolt to the bottom of your seat. Dont forget to use anti seize compound on the threads and proper 6mm allen wrench.